RCLONE and GDrive problem

Help and Support
1

I have a problem with RSYNC and GDrive for a few days now.
I synchronize in one direction, from PC to the GDrive cloud, daily from cron.
After doing RCLONE, I delete trash on GDrive, also using RCLONE.

So far everything has been working normally, but now I have a message about exceeding the number of transactions per minute.
However, sometimes - oddly enough - everything works fine. But this is quite a rare situation.

So I reduced the number of transactions to 10 and than to 1. But the effect is the same.

Can I improve something?

rclone version

rclone v1.53.3-DEV
- os/arch: linux/amd64
- go version: go1.15,5

As You can see, Google Drive is used.

Command

rclone --tpslimit 1 sync /home/gosia/Pobrane Patryk:/Pobrane/Gosia/

The rclone config

[Patryk]
type = drive
scope = drive
token = {"access_token":"<token-1","token_type":"Bearer","refresh_token":"token-2","expiry":"2023-03-11T13:08:12.924364405+01:00"}

Logs

Details:
[
  {
    "@type": "type.googleapis.com/google.rpc.ErrorInfo",
    "domain": "googleapis.com",
    "metadata": {
      "consumer": "projects/202264815644",
      "quota_limit": "defaultPerMinutePerProject",
      "quota_limit_value": "420000",
      "quota_location": "global",
      "quota_metric": "drive.googleapis.com/default",
      "service": "drive.googleapis.com"
    },
    "reason": "RATE_LIMIT_EXCEEDED"
  },
  {
    "@type": "type.googleapis.com/google.rpc.Help",
    "links": [
      {
        "description": "Request a higher quota limit.",
        "url": "https://cloud.google.com/docs/quota#requesting_higher_quota"
      }
    ]
  }
]
, rateLimitExceeded```
1 Like
2

Most likely, you ran out of download or upload quota as the whole log would show it more.

That's an ancient version. You'd want to update that.

3

The limit is probably not exceeded because sometimes/partially the synchronization succeeds.
Below is a more detailed log (-vv). That is, as many characters as this forum allows.
As for the version, it is the one available in the repo of my Linux distribution. I don't want to install anything outside of the repo because then there are problems. Unless there's no other option.

2023/03/11 14:13:04 DEBUG : rclone: Version "v1.53.3-DEV" starting with parameters ["rclone" "-vv" "--tpslimit" "1" "sync" "/home/gosia/Pobrane" "Patryk:/Pobrane/Gosia/"]
2023/03/11 14:13:04 DEBUG : Creating backend with remote "/home/gosia/Pobrane"
2023/03/11 14:13:04 DEBUG : Using config file from "/root/.config/rclone/rclone.conf"
2023/03/11 14:13:04 INFO  : Starting HTTP transaction limiter: max 1 transactions/s with burst 1
2023/03/11 14:13:04 DEBUG : Creating backend with remote "Patryk:/Pobrane/Gosia/"
2023/03/11 14:13:04 DEBUG : Google drive root 'Pobrane/Gosia': root_folder_id = "0AGB6p0aQ1h4mUk9PVA" - save this in the config to speed up startup
2023/03/11 14:13:07 DEBUG : fs cache: renaming cache item "Patryk:/Pobrane/Gosia/" to be canonical "Patryk:Pobrane/Gosia"
2023/03/11 14:13:10 DEBUG : .directory: Size and modification time the same (differ by -403.046µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : HP-Laser-MFP-135a-Print-Driver-for-Linux-OS.tar.gz: Size and modification time the same (differ by -939.484µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : .directory: Unchanged skipping
2023/03/11 14:13:10 DEBUG : HP-Laser-MFP-135a-Print-Driver-for-Linux-OS.tar.gz: Unchanged skipping
2023/03/11 14:13:10 DEBUG : PARTYCJE_DYSKU: Size and modification time the same (differ by -647.525µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : PARTYCJE_DYSKU: Unchanged skipping
2023/03/11 14:13:10 DEBUG : TSDoctor-ver2.lic: Size and modification time the same (differ by -637.727µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : TSDoctor-ver2.lic: Unchanged skipping
2023/03/11 14:13:10 DEBUG : airplay.jar: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : airplay.jar: Unchanged skipping
2023/03/11 14:13:10 DEBUG : apple_air: Size and modification time the same (differ by -1.303µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : apple_air: Unchanged skipping
2023/03/11 14:13:10 DEBUG : check_zoom: Size and modification time the same (differ by -195.483µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : ca.crt: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : ca.crt: Unchanged skipping
2023/03/11 14:13:10 DEBUG : clamav.png: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : clamav.png: Unchanged skipping
2023/03/11 14:13:10 DEBUG : clear_cache: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : clear_cache: Unchanged skipping
2023/03/11 14:13:10 DEBUG : cm: Size and modification time the same (differ by -661.339µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : cm: Unchanged skipping
2023/03/11 14:13:10 DEBUG : cron_gosia: Size and modification time the same (differ by -409.587µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : cron_gosia: Unchanged skipping
2023/03/11 14:13:10 DEBUG : cron_root: Size and modification time the same (differ by -910.527µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : cron_root: Unchanged skipping
2023/03/11 14:13:10 DEBUG : crossover-16.2.5-1.rpm: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : crossover-16.2.5-1.rpm: Unchanged skipping
2023/03/11 14:13:10 DEBUG : cups_del: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : cups_del: Unchanged skipping
2023/03/11 14:13:10 DEBUG : czyszczenie: Size and modification time the same (differ by -52.573µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : czyszczenie: Unchanged skipping
2023/03/11 14:13:10 DEBUG : dial: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : dial: Unchanged skipping
2023/03/11 14:13:10 DEBUG : dial1: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : dial1: Unchanged skipping
2023/03/11 14:13:10 DEBUG : drop: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : drop: Unchanged skipping
2023/03/11 14:13:10 DEBUG : dvb-usb-it9135.fw: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : dvb-usb-it9135.fw: Unchanged skipping
2023/03/11 14:13:10 DEBUG : ee: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : ee: Unchanged skipping
2023/03/11 14:13:10 DEBUG : enable_lpt: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : enable_lpt: Unchanged skipping
2023/03/11 14:13:10 DEBUG : fos_play: Size and modification time the same (differ by -240.455µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : fos_play: Unchanged skipping
2023/03/11 14:13:10 DEBUG : get_dvb_firmware: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : get_dvb_firmware: Unchanged skipping
2023/03/11 14:13:10 DEBUG : gosia.p12: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : aktualizacja.cron: Size and modification time the same (differ by -229.508µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : gosia.p12: Unchanged skipping
2023/03/11 14:13:10 DEBUG : aktualizacja.cron: Unchanged skipping
2023/03/11 14:13:10 DEBUG : gphotofs: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : gphotofs: Unchanged skipping
2023/03/11 14:13:10 DEBUG : image_gosia: Size and modification time the same (differ by -819.138µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : image_gosia: Unchanged skipping
2023/03/11 14:13:10 DEBUG : insync-1.3.6.36076-fc17.x86_64-1.rpm: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : insync-1.3.6.36076-fc17.x86_64-1.rpm: Unchanged skipping
2023/03/11 14:13:10 DEBUG : WeeMee.png: Size and modification time the same (differ by -726.637µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : WeeMee.png: Unchanged skipping
2023/03/11 14:13:10 DEBUG : kasowanie: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : kasowanie: Unchanged skipping
2023/03/11 14:13:10 DEBUG : kde-sms.sh: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : ipscan-3.8.2-1.x86_64.rpm: Size and modification time the same (differ by -251.419µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : ipscan-3.8.2-1.x86_64.rpm: Unchanged skipping
2023/03/11 14:13:10 DEBUG : kodak: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : kodak: Unchanged skipping
2023/03/11 14:13:10 DEBUG : media: Size and modification time the same (differ by -195.025µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : media: Unchanged skipping
2023/03/11 14:13:10 DEBUG : hp-color_laserjet_pro_m252-ps.ppd: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : media-root: Size and modification time the same (differ by -741.747µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : media-root: Unchanged skipping
2023/03/11 14:13:10 DEBUG : mount: Size and modification time the same (differ by -159.354µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : mount: Unchanged skipping
2023/03/11 14:13:10 DEBUG : nagraj: Size and modification time the same (differ by -253.072µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : nagraj: Unchanged skipping
2023/03/11 14:13:10 DEBUG : kde-sms.sh: Unchanged skipping
2023/03/11 14:13:10 DEBUG : pass: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : nextcl_dog: Size and modification time the same (differ by -557.87µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : nextcl_dog: Unchanged skipping
2023/03/11 14:13:10 DEBUG : pass-1: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : hp-color_laserjet_pro_m252-ps.ppd: Unchanged skipping
2023/03/11 14:13:10 DEBUG : pass-1: Unchanged skipping
2023/03/11 14:13:10 DEBUG : pomin.txt: Size and modification time the same (differ by -543.886µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : pomin_1.txt: Size and modification time the same (differ by -19.93µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : pomin.txt: Unchanged skipping
2023/03/11 14:13:10 DEBUG : pomin_2.txt: Size and modification time the same (differ by -426.467µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : pomin_2.txt: Unchanged skipping
2023/03/11 14:13:10 DEBUG : pomin_3.txt: Size and modification time the same (differ by -198.498µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : pomin_3.txt: Unchanged skipping
2023/03/11 14:13:10 DEBUG : rclone.bat: Size and modification time the same (differ by -192.418µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : rclone.bat: Unchanged skipping
2023/03/11 14:13:10 DEBUG : sagem: Size and modification time the same (differ by -686.261µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : sagem: Unchanged skipping
2023/03/11 14:13:10 DEBUG : TS: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : pass: Unchanged skipping
2023/03/11 14:13:10 DEBUG : TS: Unchanged skipping
2023/03/11 14:13:10 DEBUG : spam: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : spam_1: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : SMB3_Ubuntu.pcap: Size and modification time the same (differ by -25.065µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : SMB3_Ubuntu.pcap: Unchanged skipping
2023/03/11 14:13:10 DEBUG : spam_2: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : spam_2: Unchanged skipping
2023/03/11 14:13:10 DEBUG : stop: Size and modification time the same (differ by -328.634µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : stop: Unchanged skipping
2023/03/11 14:13:10 DEBUG : stop.sh: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : stop.sh: Unchanged skipping
2023/03/11 14:13:10 DEBUG : tcpdump: Size and modification time the same (differ by -454.361µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : tcpdump: Unchanged skipping
2023/03/11 14:13:10 DEBUG : test: Size and modification time the same (differ by -518.89µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : pomin_1.txt: Unchanged skipping
2023/03/11 14:13:10 DEBUG : test: Unchanged skipping
2023/03/11 14:13:10 DEBUG : test.bat: Size and modification time the same (differ by -275.83µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : test.bat: Unchanged skipping
2023/03/11 14:13:10 DEBUG : voice: Size and modification time the same (differ by -528.136µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : voice: Unchanged skipping
2023/03/11 14:13:10 DEBUG : wzorzec: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : wzorzec: Unchanged skipping
2023/03/11 14:13:10 DEBUG : spam: Unchanged skipping
2023/03/11 14:13:10 DEBUG : update: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : update: Unchanged skipping
2023/03/11 14:13:10 DEBUG : asus: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : asus: Unchanged skipping
2023/03/11 14:13:10 DEBUG : check_zoom: Unchanged skipping
2023/03/11 14:13:10 DEBUG : Apple.png: Size and modification time the same (differ by -614.385µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : Apple.png: Unchanged skipping
2023/03/11 14:13:10 DEBUG : skan: Size and modification time the same (differ by -398.905µs, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : skan: Unchanged skipping
2023/03/11 14:13:10 DEBUG : spam_1: Unchanged skipping
2023/03/11 14:13:10 DEBUG : uld/install-printer.sh: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : uld/install.sh: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : uld/install-printer.sh: Unchanged skipping
2023/03/11 14:13:10 DEBUG : uld/install.sh: Unchanged skipping
2023/03/11 14:13:10 DEBUG : uld/install-scanner.sh: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : uld/install-scanner.sh: Unchanged skipping
2023/03/11 14:13:10 DEBUG : uld/uninstall-printer.sh: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : uld/uninstall-printer.sh: Unchanged skipping
2023/03/11 14:13:10 DEBUG : uld/uninstall-scanner.sh: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : uld/uninstall-scanner.sh: Unchanged skipping
2023/03/11 14:13:10 DEBUG : uld/uninstall.sh: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:10 DEBUG : uld/uninstall.sh: Unchanged skipping
2023/03/11 14:13:11 DEBUG : Telegram/Telegram: Size and modification time the same (differ by -264.771µs, within tolerance 1ms)
2023/03/11 14:13:11 DEBUG : Telegram/Updater: Size and modification time the same (differ by -275.446µs, within tolerance 1ms)
2023/03/11 14:13:11 DEBUG : Telegram/Updater: Unchanged skipping
2023/03/11 14:13:11 DEBUG : Telegram/Telegram_logo.png: Size and modification time the same (differ by -799.845µs, within tolerance 1ms)
2023/03/11 14:13:11 DEBUG : Telegram/Telegram_logo.png: Unchanged skipping
2023/03/11 14:13:11 DEBUG : Telegram/Telegram: Unchanged skipping
2023/03/11 14:13:12 DEBUG : Foscam/Security-Camera-icon.png: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:12 DEBUG : Foscam/fos_play: Size and modification time the same (differ by -883.496µs, within tolerance 1ms)
2023/03/11 14:13:12 DEBUG : Foscam/foscam.png: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:12 DEBUG : Foscam/fos_play: Unchanged skipping
2023/03/11 14:13:12 DEBUG : Foscam/foscam.png: Unchanged skipping
2023/03/11 14:13:12 DEBUG : Foscam/fos_conv: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:12 DEBUG : Foscam/fos_conv: Unchanged skipping
2023/03/11 14:13:12 DEBUG : Foscam/foscam.ico: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:12 DEBUG : Foscam/foscam.ico: Unchanged skipping
2023/03/11 14:13:12 DEBUG : Foscam/Security-Camera-icon.png: Unchanged skipping
2023/03/11 14:13:12 DEBUG : Foscam/play_file: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:12 DEBUG : Foscam/play_file: Unchanged skipping
2023/03/11 14:13:13 DEBUG : uld/x86_64/gettext: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:13 DEBUG : uld/x86_64/gettext: Unchanged skipping
2023/03/11 14:13:13 DEBUG : uld/x86_64/libsane-smfp.so.1.0.1: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:13 DEBUG : uld/x86_64/libsane-smfp.so.1.0.1: Unchanged skipping
2023/03/11 14:13:13 DEBUG : uld/x86_64/libscmssc.so: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:13 DEBUG : uld/x86_64/libscmssc.so: Unchanged skipping
2023/03/11 14:13:13 DEBUG : uld/x86_64/pstosecps: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:13 DEBUG : uld/x86_64/pstosecps: Unchanged skipping
2023/03/11 14:13:13 DEBUG : uld/x86_64/rastertospl: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:13 DEBUG : uld/x86_64/rastertospl: Unchanged skipping
2023/03/11 14:13:13 DEBUG : uld/x86_64/smfpnetdiscovery: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:13 DEBUG : uld/x86_64/smfpnetdiscovery: Unchanged skipping
2023/03/11 14:13:13 DEBUG : uld/x86_64/usbresetter: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:13 DEBUG : uld/x86_64/usbresetter: Unchanged skipping
2023/03/11 14:13:14 DEBUG : uld/aarch64/libsane-smfp.so.1.0.1: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:14 DEBUG : uld/aarch64/pstosecps: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:14 DEBUG : uld/aarch64/gettext: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:14 DEBUG : uld/aarch64/usbresetter: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:14 DEBUG : uld/aarch64/usbresetter: Unchanged skipping
2023/03/11 14:13:14 DEBUG : uld/aarch64/gettext: Unchanged skipping
2023/03/11 14:13:14 DEBUG : uld/aarch64/rastertospl: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:14 DEBUG : uld/aarch64/rastertospl: Unchanged skipping
2023/03/11 14:13:14 DEBUG : uld/aarch64/libscmssc.so: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:14 DEBUG : uld/aarch64/libscmssc.so: Unchanged skipping
2023/03/11 14:13:14 DEBUG : uld/aarch64/libsane-smfp.so.1.0.1: Unchanged skipping
2023/03/11 14:13:14 DEBUG : uld/aarch64/smfpnetdiscovery: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:14 DEBUG : uld/aarch64/smfpnetdiscovery: Unchanged skipping
2023/03/11 14:13:14 DEBUG : uld/aarch64/pstosecps: Unchanged skipping
2023/03/11 14:13:15 DEBUG : uld/mips64/gettext: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:15 DEBUG : uld/mips64/smfpnetdiscovery: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:15 DEBUG : uld/mips64/smfpnetdiscovery: Unchanged skipping
2023/03/11 14:13:15 DEBUG : uld/mips64/gettext: Unchanged skipping
2023/03/11 14:13:15 DEBUG : uld/mips64/pstosecps: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:15 DEBUG : uld/mips64/pstosecps: Unchanged skipping
2023/03/11 14:13:15 DEBUG : uld/mips64/rastertospl: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:15 DEBUG : uld/mips64/rastertospl: Unchanged skipping
2023/03/11 14:13:15 DEBUG : uld/mips64/libscmssc.so: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:15 DEBUG : uld/mips64/libscmssc.so: Unchanged skipping
2023/03/11 14:13:15 DEBUG : uld/mips64/usbresetter: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:15 DEBUG : uld/mips64/usbresetter: Unchanged skipping
2023/03/11 14:13:15 DEBUG : uld/mips64/libsane-smfp.so.1.0.1: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:15 DEBUG : uld/mips64/libsane-smfp.so.1.0.1: Unchanged skipping
2023/03/11 14:13:16 DEBUG : uld/i386/libsane-smfp.so.1.0.1: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:16 DEBUG : uld/i386/libsane-smfp.so.1.0.1: Unchanged skipping
2023/03/11 14:13:16 DEBUG : uld/i386/pstosecps: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:16 DEBUG : uld/i386/pstosecps: Unchanged skipping
2023/03/11 14:13:16 DEBUG : uld/i386/smfpnetdiscovery: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:16 DEBUG : uld/i386/smfpnetdiscovery: Unchanged skipping
2023/03/11 14:13:16 DEBUG : uld/i386/rastertospl: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:16 DEBUG : uld/i386/rastertospl: Unchanged skipping
2023/03/11 14:13:16 DEBUG : uld/i386/gettext: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:16 DEBUG : uld/i386/gettext: Unchanged skipping
2023/03/11 14:13:16 DEBUG : uld/i386/usbresetter: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:16 DEBUG : uld/i386/usbresetter: Unchanged skipping
2023/03/11 14:13:16 DEBUG : uld/i386/libscmssc.so: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:16 DEBUG : uld/i386/libscmssc.so: Unchanged skipping
2023/03/11 14:13:17 DEBUG : pacer: low level retry 1/10 (error googleapi: Error 403: Quota exceeded for quota metric 'Queries' and limit 'Queries per minute' of service 'drive.googleapis.com' for consumer 'project_number:202264815644'.
Details:
[
  {
    "@type": "type.googleapis.com/google.rpc.ErrorInfo",
    "domain": "googleapis.com",
    "metadata": {
      "consumer": "projects/202264815644",
      "quota_limit": "defaultPerMinutePerProject",
      "quota_limit_value": "420000",
      "quota_location": "global",
      "quota_metric": "drive.googleapis.com/default",
      "service": "drive.googleapis.com"
    },
    "reason": "RATE_LIMIT_EXCEEDED"
  },
  {
    "@type": "type.googleapis.com/google.rpc.Help",
    "links": [
      {
        "description": "Request a higher quota limit.",
        "url": "https://cloud.google.com/docs/quota#requesting_higher_quota"
      }
    ]
  }
]
, rateLimitExceeded)
2023/03/11 14:13:17 DEBUG : pacer: Rate limited, increasing sleep to 1.768727012s
2023/03/11 14:13:18 DEBUG : pacer: low level retry 2/10 (error googleapi: Error 403: Quota exceeded for quota metric 'Queries' and limit 'Queries per minute' of service 'drive.googleapis.com' for consumer 'project_number:202264815644'.
Details:
[
  {
    "@type": "type.googleapis.com/google.rpc.ErrorInfo",
    "domain": "googleapis.com",
    "metadata": {
      "consumer": "projects/202264815644",
      "quota_limit": "defaultPerMinutePerProject",
      "quota_limit_value": "420000",
      "quota_location": "global",
      "quota_metric": "drive.googleapis.com/default",
      "service": "drive.googleapis.com"
    },
    "reason": "RATE_LIMIT_EXCEEDED"
  },
  {
    "@type": "type.googleapis.com/google.rpc.Help",
    "links": [
      {
        "description": "Request a higher quota limit.",
        "url": "https://cloud.google.com/docs/quota#requesting_higher_quota"
      }
    ]
  }
]
, rateLimitExceeded)
2023/03/11 14:13:18 DEBUG : pacer: Rate limited, increasing sleep to 2.296234771s
2023/03/11 14:13:19 DEBUG : pacer: low level retry 3/10 (error googleapi: Error 403: Quota exceeded for quota metric 'Queries' and limit 'Queries per minute' of service 'drive.googleapis.com' for consumer 'project_number:202264815644'.
Details:
[
  {
    "@type": "type.googleapis.com/google.rpc.ErrorInfo",
    "domain": "googleapis.com",
    "metadata": {
      "consumer": "projects/202264815644",
      "quota_limit": "defaultPerMinutePerProject",
      "quota_limit_value": "420000",
      "quota_location": "global",
      "quota_metric": "drive.googleapis.com/default",
      "service": "drive.googleapis.com"
    },
    "reason": "RATE_LIMIT_EXCEEDED"
  },
  {
    "@type": "type.googleapis.com/google.rpc.Help",
    "links": [
      {
        "description": "Request a higher quota limit.",
        "url": "https://cloud.google.com/docs/quota#requesting_higher_quota"
      }
    ]
  }
]
, rateLimitExceeded)
2023/03/11 14:13:19 DEBUG : pacer: Rate limited, increasing sleep to 4.434059787s
2023/03/11 14:13:21 DEBUG : pacer: low level retry 4/10 (error googleapi: Error 403: Quota exceeded for quota metric 'Queries' and limit 'Queries per minute' of service 'drive.googleapis.com' for consumer 'project_number:202264815644'.
Details:
[
  {
    "@type": "type.googleapis.com/google.rpc.ErrorInfo",
    "domain": "googleapis.com",
    "metadata": {
      "consumer": "projects/202264815644",
      "quota_limit": "defaultPerMinutePerProject",
      "quota_limit_value": "420000",
      "quota_location": "global",
      "quota_metric": "drive.googleapis.com/default",
      "service": "drive.googleapis.com"
    },
    "reason": "RATE_LIMIT_EXCEEDED"
  },
  {
    "@type": "type.googleapis.com/google.rpc.Help",
    "links": [
      {
        "description": "Request a higher quota limit.",
        "url": "https://cloud.google.com/docs/quota#requesting_higher_quota"
      }
    ]
  }
]
, rateLimitExceeded)
2023/03/11 14:13:21 DEBUG : pacer: Rate limited, increasing sleep to 8.846058295s
2023/03/11 14:13:25 DEBUG : pacer: low level retry 5/10 (error googleapi: Error 403: Quota exceeded for quota metric 'Queries' and limit 'Queries per minute' of service 'drive.googleapis.com' for consumer 'project_number:202264815644'.
Details:
[
  {
    "@type": "type.googleapis.com/google.rpc.ErrorInfo",
    "domain": "googleapis.com",
    "metadata": {
      "consumer": "projects/202264815644",
      "quota_limit": "defaultPerMinutePerProject",
      "quota_limit_value": "420000",
      "quota_location": "global",
      "quota_metric": "drive.googleapis.com/default",
      "service": "drive.googleapis.com"
    },
    "reason": "RATE_LIMIT_EXCEEDED"
  },
  {
    "@type": "type.googleapis.com/google.rpc.Help",
    "links": [
      {
        "description": "Request a higher quota limit.",
        "url": "https://cloud.google.com/docs/quota#requesting_higher_quota"
      }
    ]
  }
]
, rateLimitExceeded)
2023/03/11 14:13:25 DEBUG : pacer: Rate limited, increasing sleep to 16.510362508s
2023/03/11 14:13:35 DEBUG : pacer: Reducing sleep to 0s
2023/03/11 14:13:35 DEBUG : uld/noarch/.version-printer: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/.version-printer: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/.version-scanner-script: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/.version-scanner-script: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/firewall-firewalld: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/firewall-fedora: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/firewall-fedora: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/bash_debugging: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/bash_debugging: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/firewall-shorewall: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/firewall-shorewall: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/firewall-suse: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/firewall-suse: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/firewall.sh: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/firewall.sh: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/legacy_compat.pkg: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/legacy_compat.pkg: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/libsane-smfp.cfg: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/libsane-smfp.cfg: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/oem.conf: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/firewall-firewalld: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/package_uninstall.sh: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/package_uninstall.sh: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/package_utils: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/pagesize.xml: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/pagesize.xml: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/post_install.sh: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/post_install.sh: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/pre_install.sh: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/pre_install.sh: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/printer-meta.pkg: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/printer-meta.pkg: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/printer-script.pkg: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/printer-script.pkg: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/printer.pkg: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/printer.pkg: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/scanner-meta.pkg: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/scanner-meta.pkg: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/scanner-script.pkg: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/scanner-script.pkg: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/scanner.pkg: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/scanner.pkg: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/scripting_utils: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/scripting_utils: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/package_utils: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/security.pkg: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/security.pkg: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/package_api_defaults: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/package_api_defaults: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/oem.conf: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/.version-printer-script: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/.version-printer-script: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/package_install.sh: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/package_install.sh: Unchanged skipping
2023/03/11 14:13:35 DEBUG : uld/noarch/.version-scanner: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:35 DEBUG : uld/noarch/.version-scanner: Unchanged skipping
2023/03/11 14:13:51 DEBUG : uld/noarch/license/eula-ar.txt: Size and modification time the same (differ by 0s, within tolerance 1ms)
2023/03/11 14:13:51 DEBUG : uld/noarch/license/eula-fr.txt: Size and modification time the same (differ by 0s, within tolerance 1ms)
4

Repos are bad for certain things. You have a 3-4 year old version so it's not supported.

See:

1 Like
5

I was having this same issue on Linux Mint 21.1 for the last week. Like you, I was also using Rclone 1.53 because it was included in my distro's repository. I just upgraded to rclone 1.61 and that seems to have partially fixed the issue, in that it's able to upload a few more files before throwing an error. I'll post log files after it finishes running.

1 Like
6

Yep, upgrade to ver 1.61 seams to resolved the problem. Will look what happens in future.

7

I've been running into the exact same issue for about a week, exact same error and project number.
While it seemed innocent, when adding content it results into actual API limits and prevents playback on my Plex Media Server

chrome_zlodm0bMbg

After hours of troubleshooting, removing the rclone config, creating a new project and using those client-id&secret seemed to have resolved it, it's been running again for half an hour without errors, let's see how long that upholds.

8

Same issue here, any conclusive solution?
rclone -V
rclone v1.62.1

  • os/version: ubuntu 22.04 (64 bit)

2023/03/21 11:06:28 ERROR : RECEIPT/2020: error reading source directory: couldn't list directory: googleapi: Error 403: Quota exceeded for quota metric 'Queries' and limit 'Queries per minute' of service 'drive.googleapis.com' for consumer 'project_number:202264815644'.
Details:
[
{
"@type": "type.googleapis.com/google.rpc.ErrorInfo",
"domain": "googleapis.com",
"metadata": {
"consumer": "projects/202264815644",
"quota_limit": "defaultPerMinutePerProject",
"quota_limit_value": "420000",
"quota_location": "global",
"quota_metric": "drive.googleapis.com/default",
"service": "drive.googleapis.com"
},
"reason": "RATE_LIMIT_EXCEEDED"
},
{
"@type": "type.googleapis.com/google.rpc.Help",
"links": [
{
"description": "Request a higher quota limit.",
"url": "https://cloud.google.com/docs/quota#requesting_higher_quota"
}
]
}
]
, rateLimitExceeded

9

You only have so much upload/download per day on Google. 750GB Upload is a documented one and there are many, many others.

Not much to do other than wait it out.

10

I am far from this limit. Daleko mi do tego limitu. 1G dziennie maks.

11

The error message seems to indicate otherwise.

12

Ups, sorry. Auto-correction was set to other side.
Should be - I am far from that limit. 1G dayly max.

13

The error for me only started a couple of weeks ago after more than two years of flawless operation.
Drive size did not change.

14

I have the same impression.