# Beginner question

**URL:** <https://forum.rclone.org/t/beginner-question/47168>\
**Category:** Help and Support\
**Created:** [August 5, 2024, 7:19pm UTC](https://forum.rclone.org/t/beginner-question/47168 "2024-08-05T19:19:03Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![stevecoh1](https://forum.rclone.org/user_avatar/forum.rclone.org/stevecoh1/32/15620_2.png) [@stevecoh1](https://forum.rclone.org/u/stevecoh1)\
**Post date:** [August 5, 2024, 7:19pm UTC](https://forum.rclone.org/t/beginner-question/47168/1 "2024-08-05T19:19:03Z")

</div>

#### What is the problem you are having with rclone?

No problem, but I rushed through install with less understanding than I should have and would like to start over. How may I do so?

#### Run the command 'rclone version' and share the full output of the command.

$ rclone version  
rclone v1.60.1-DEV

- os/version: ubuntu 24.04 (64 bit)
- os/kernel: 6.8.0-39-generic (x86\_64)
- os/type: linux
- os/arch: amd64
- go/version: go1.22.2
- go/linking: dynamic
- go/tags: none

Are you on the latest version of rclone? You can validate by checking the version listed here: [Rclone downloads](https://rclone.org/downloads/)  
--\>  
No, I just used apt from ubuntu. I see that I am seven versions behind latest and probably should upgrade. If I do that, will my remote go away? I have no problem if that is true.

#### Which cloud storage system are you using? (eg Google Drive)

Google Drive

#### The command you were trying to run (eg `rclone copy /tmp remote:tmp`)

```auto
Paste command here

```

No particular command. What I want to understand and don't is how I access the remote I created with tools like the command line or Nautilus.

#### Please run 'rclone config redacted' and share the full output. If you get command not found, please make sure to update rclone.

```auto
$ rclone config redacted
Usage:
  rclone config [flags]
  rclone config [command]

Available Commands:
...

```

#### A log from the command that you were trying to run with the `-vv` flag

```auto
Paste log here

```

I just want to start over. My use case is extremely small. I am a single user, not part of an organization. I merely want to share one or two files among multiple computers.

---

<div class="post-metadata">

**Author:** ![asdffdsa](https://forum.rclone.org/letter_avatar_proxy/v4/letter/a/848f3c/32.png) [@asdffdsa](https://forum.rclone.org/u/asdffdsa)\
**Post date:** [August 5, 2024, 7:27pm UTC](https://forum.rclone.org/t/beginner-question/47168/2 "2024-08-05T19:27:15Z")

</div>

welcome to the forun,

> [@stevecoh1](#):
>
> If I do that, will my remote go away? I have no problem if that is true.  
> I just want to start over

remote config file should not go away. but you never know for sure.  
always good to backup it up. to find it, use `rclone config file`

> [@stevecoh1](#):
>
> I just want to start over

can remove rclone using `apt` and then [https://rclone.org/install/#script-installation](https://rclone.org/install/#script-installation)

> [@stevecoh1](#):
>
> What I want to understand and don't is how I access the remote I created with tools like the command line or Nautilus.

first, test `rclone lsd remote: -vv` - note: change `remote` to the name of your remote.

---

<div class="post-metadata">

**Author:** ![stevecoh1](https://forum.rclone.org/user_avatar/forum.rclone.org/stevecoh1/32/15620_2.png) [@stevecoh1](https://forum.rclone.org/u/stevecoh1)\
**Post date:** [August 5, 2024, 11:24pm UTC](https://forum.rclone.org/t/beginner-question/47168/3 "2024-08-05T23:24:56Z")

</div>

Thank you very much for your help. I have watched a few tutorials and now understand what the config routine is doing.

```auto
$ rclone lsd myremote: -vv
2024/08/05 16:13:26 DEBUG : rclone: Version "v1.67.0" starting with parameters ["rclone" "lsd" "myremote:" "-vv"]
2024/08/05 16:13:26 DEBUG : Creating backend with remote "myremote:"
2024/08/05 16:13:26 DEBUG : Using config file from "/home/scohen/.config/rclone/rclone.conf"
2024/08/05 16:13:26 DEBUG : 6 go routines active

```

and then

```auto
$ rclone ls myremote: -vv
2024/08/05 16:18:16 DEBUG : rclone: Version "v1.67.0" starting with parameters ["rclone" "ls" "myremote:" "-vv"]
2024/08/05 16:18:16 DEBUG : Creating backend with remote "myremote:"
2024/08/05 16:18:16 DEBUG : Using config file from "/home/scohen/.config/rclone/rclone.conf"
    66670 abc.xyz
2024/08/05 16:18:16 DEBUG : 6 go routines active

```

How then do I

1. access the files with an app on the local machine
2. save changes that propagate back to Google Drive
3. if other devices change files on the Google Drive, have the most recent version load when the machine with rclone accesses them.  
in other words, keep them in synch.

---

<div class="post-metadata">

**Author:** ![asdffdsa](https://forum.rclone.org/letter_avatar_proxy/v4/letter/a/848f3c/32.png) [@asdffdsa](https://forum.rclone.org/u/asdffdsa)\
**Post date:** [August 5, 2024, 11:40pm UTC](https://forum.rclone.org/t/beginner-question/47168/4 "2024-08-05T23:40:49Z")

</div>

> [@stevecoh1](#):
>
> 1. access the files with an app on the local machine
> 2. save changes that propagate back to Google Drive
> 3. if other devices change files on the Google Drive, have the most recent version load when the machine with rclone accesses them.

want to mount gdrive as local storage. a very simple example is:  
`rclone mount myremote: /home/scohen/mount --allow-other`

> [@stevecoh1](#):
>
> in other words, keep them in synch.

`rclone sync`

---

<div class="post-metadata">

**Author:** ![stevecoh1](https://forum.rclone.org/user_avatar/forum.rclone.org/stevecoh1/32/15620_2.png) [@stevecoh1](https://forum.rclone.org/u/stevecoh1)\
**Post date:** [August 6, 2024, 12:35am UTC](https://forum.rclone.org/t/beginner-question/47168/5 "2024-08-06T00:35:23Z")

</div>

Thank you very much!

---

<div class="post-metadata">

**Author:** ![stevecoh1](https://forum.rclone.org/user_avatar/forum.rclone.org/stevecoh1/32/15620_2.png) [@stevecoh1](https://forum.rclone.org/u/stevecoh1)\
**Post date:** [August 6, 2024, 3:23pm UTC](https://forum.rclone.org/t/beginner-question/47168/6 "2024-08-06T15:23:49Z")

</div>

Hey, I tried the rclone mount command and it did what I wanted it to (the files in my Google Drive now appear on my file system) but it never returned; that is the process is still going, and it has been that way for 15 minutes. Is this a problem, can I just kill the process, or what?

---

<div class="post-metadata">

**Author:** ![asdffdsa](https://forum.rclone.org/letter_avatar_proxy/v4/letter/a/848f3c/32.png) [@asdffdsa](https://forum.rclone.org/u/asdffdsa)\
**Post date:** [August 6, 2024, 3:26pm UTC](https://forum.rclone.org/t/beginner-question/47168/7 "2024-08-06T15:26:09Z")

</div>

> [@stevecoh1](#):
>
> but it never returned; that is the process is still going, and it has been that way for 15 minutes

correct, the `rclone mount` does not return.  
if you kill it, then cannot access the files in gdrive.

---

<div class="post-metadata">

**Author:** ![stevecoh1](https://forum.rclone.org/user_avatar/forum.rclone.org/stevecoh1/32/15620_2.png) [@stevecoh1](https://forum.rclone.org/u/stevecoh1)\
**Post date:** [August 6, 2024, 3:44pm UTC](https://forum.rclone.org/t/beginner-question/47168/8 "2024-08-06T15:44:37Z")

</div>

Oh, I didn't understand that. I am looking for a way to make the mount permanent, or at least persistent. Put it on the system level?

---

<div class="post-metadata">

**Author:** ![asdffdsa](https://forum.rclone.org/letter_avatar_proxy/v4/letter/a/848f3c/32.png) [@asdffdsa](https://forum.rclone.org/u/asdffdsa)\
**Post date:** [August 6, 2024, 3:49pm UTC](https://forum.rclone.org/t/beginner-question/47168/9 "2024-08-06T15:49:21Z")

</div>

> [@stevecoh1](#):
>
> I am looking for a way to make the mount permanent, or at least persistent. Put it on the system level?

same as with any app. systemd, cron  
the forum is full of examples.

---

<div class="post-metadata">

**Author:** ![stevecoh1](https://forum.rclone.org/user_avatar/forum.rclone.org/stevecoh1/32/15620_2.png) [@stevecoh1](https://forum.rclone.org/u/stevecoh1)\
**Post date:** [August 6, 2024, 3:50pm UTC](https://forum.rclone.org/t/beginner-question/47168/10 "2024-08-06T15:50:26Z")

</div>

Thanks. What I thought. I will have a look.

---

<div class="post-metadata">

**Author:** ![stevecoh1](https://forum.rclone.org/user_avatar/forum.rclone.org/stevecoh1/32/15620_2.png) [@stevecoh1](https://forum.rclone.org/u/stevecoh1)\
**Post date:** [August 7, 2024, 9:03pm UTC](https://forum.rclone.org/t/beginner-question/47168/11 "2024-08-07T21:03:11Z")

</div>

> # rclone sync
> 
> Make source and dest identical, **modifying destination only**.

But I want this to work bidirectionally. If a file in the local directory is changed, I want that propagated out to the remote (Google Drive). If a file on the remote is changed by another device, I want that propagated back to the machine running rclone.

How can I do this?

---

<div class="post-metadata">

**Author:** ![asdffdsa](https://forum.rclone.org/letter_avatar_proxy/v4/letter/a/848f3c/32.png) [@asdffdsa](https://forum.rclone.org/u/asdffdsa)\
**Post date:** [August 7, 2024, 9:10pm UTC](https://forum.rclone.org/t/beginner-question/47168/12 "2024-08-07T21:10:09Z")

</div>

> [@stevecoh1](#):
>
> But I want this to work bidirectionally

`rclone bisync`

---

<div class="post-metadata">

**Author:** ![stevecoh1](https://forum.rclone.org/user_avatar/forum.rclone.org/stevecoh1/32/15620_2.png) [@stevecoh1](https://forum.rclone.org/u/stevecoh1)\
**Post date:** [August 8, 2024, 5:23pm UTC](https://forum.rclone.org/t/beginner-question/47168/13 "2024-08-08T17:23:08Z")

</div>

I have gotten myself into a pickle playing around with rclone and systemd and now I am in a state I can't seem to get out of.

I created a mount called wopa: in my configuration file, a Google Drive folder. I mounted it at $HOME/wopa. (I actually spelled it out, didn't use $HOME). At one point it worked. but I wanted it running as a service. I tried different commands putting rclone mount in systemd and things didn't work.

Whatever I may have done, I now find myself in this situation:

```auto
cd $HOME
$rclone delete wopa:
$ ls -al
ls: cannot access 'wopa': Transport endpoint is not connected
total 2849384
...
d????????? ? ? ? ? ? wopa
$ ls -al wopa
ls: cannot access 'wopa': Transport endpoint is not connected
$ rmdir wopa
rmdir: failed to remove 'wopa': Device or resource busy

```

How do I get out of this mess?

---

<div class="post-metadata">

**Author:** ![asdffdsa](https://forum.rclone.org/letter_avatar_proxy/v4/letter/a/848f3c/32.png) [@asdffdsa](https://forum.rclone.org/u/asdffdsa)\
**Post date:** [August 8, 2024, 5:31pm UTC](https://forum.rclone.org/t/beginner-question/47168/14 "2024-08-08T17:31:58Z")

</div>

> [@stevecoh1](#):
>
> I created a mount called wopa: in my configuration file

that is not possible. cannot store mount information in the config file.  
i think you mean, that you created a `remote` for gdrive in the config file?

> [@stevecoh1](#):
>
> How do I get out of this mess?

let's start with the basic info:

- `rclone version`
- `rclone config redacted`
- `rclone lsd wopa: -vv`

---

<div class="post-metadata">

**Author:** ![stevecoh1](https://forum.rclone.org/user_avatar/forum.rclone.org/stevecoh1/32/15620_2.png) [@stevecoh1](https://forum.rclone.org/u/stevecoh1)\
**Post date:** [August 8, 2024, 5:35pm UTC](https://forum.rclone.org/t/beginner-question/47168/15 "2024-08-08T17:35:21Z")

</div>

```auto
$ rclone version
rclone v1.67.0
- os/version: ubuntu 24.04 (64 bit)
- os/kernel: 6.8.0-39-generic (x86_64)
- os/type: linux
- os/arch: amd64
- go/version: go1.22.4
- go/linking: static
- go/tags: none
$ rclone config redacted
[wopa]
type = drive
scope = drive
token = XXX
team_drive = 
root_folder_id = XXX
### Double check the config for sensitive info before posting publicly
$ rclone lsd wopa: -vv
2024/08/08 10:33:05 DEBUG : rclone: Version "v1.67.0" starting with parameters ["rclone" "lsd" "wopa:" "-vv"]
2024/08/08 10:33:05 DEBUG : Creating backend with remote "wopa:"
2024/08/08 10:33:05 DEBUG : Using config file from "/home/scohen/.config/rclone/rclone.conf"
2024/08/08 10:33:06 DEBUG : 6 go routines active

```

---

<div class="post-metadata">

**Author:** ![asdffdsa](https://forum.rclone.org/letter_avatar_proxy/v4/letter/a/848f3c/32.png) [@asdffdsa](https://forum.rclone.org/u/asdffdsa)\
**Post date:** [August 8, 2024, 5:37pm UTC](https://forum.rclone.org/t/beginner-question/47168/16 "2024-08-08T17:37:56Z")

</div>

ok, good

from the mount command on the command line,  
post the top thirty lines of the debug output.

---

<div class="post-metadata">

**Author:** ![stevecoh1](https://forum.rclone.org/user_avatar/forum.rclone.org/stevecoh1/32/15620_2.png) [@stevecoh1](https://forum.rclone.org/u/stevecoh1)\
**Post date:** [August 8, 2024, 5:42pm UTC](https://forum.rclone.org/t/beginner-question/47168/17 "2024-08-08T17:42:57Z")

</div>

```auto
{scohen@taormina ~}$ rclone mount wopa: $HOME/wopa -vv
2024/08/08 10:39:10 DEBUG : rclone: Version "v1.67.0" starting with parameters ["rclone" "mount" "wopa:" "/home/scohen/wopa" "-vv"]
2024/08/08 10:39:10 DEBUG : Creating backend with remote "wopa:"
2024/08/08 10:39:10 DEBUG : Using config file from "/home/scohen/.config/rclone/rclone.conf"
2024/08/08 10:39:11 Fatal error: failed to mount FUSE fs: directory already mounted, use --allow-non-empty to mount anyway: /home/scohen/wopa

```

```auto
{scohen@taormina ~}$ rclone mount wopa: $HOME/wopa -vv --allow-non-empty
2024/08/08 10:39:40 DEBUG : rclone: Version "v1.67.0" starting with parameters ["rclone" "mount" "wopa:" "/home/scohen/wopa" "-vv" "--allow-non-empty"]
2024/08/08 10:39:40 DEBUG : Creating backend with remote "wopa:"
2024/08/08 10:39:40 DEBUG : Using config file from "/home/scohen/.config/rclone/rclone.conf"
2024/08/08 10:39:40 DEBUG : Google drive root '': Mounting on "/home/scohen/wopa"
2024/08/08 10:39:40 mount helper error: fusermount3: failed to access mountpoint /home/scohen/wopa: Permission denied
2024/08/08 10:39:40 Fatal error: failed to mount FUSE fs: fusermount: exit status 1

```

---

<div class="post-metadata">

**Author:** ![asdffdsa](https://forum.rclone.org/letter_avatar_proxy/v4/letter/a/848f3c/32.png) [@asdffdsa](https://forum.rclone.org/u/asdffdsa)\
**Post date:** [August 8, 2024, 5:45pm UTC](https://forum.rclone.org/t/beginner-question/47168/18 "2024-08-08T17:45:52Z")

</div>

`--allow-non-empty`, should never use that flag, ok?

that means you have another instance of `rclone mount` running in the background.

1. kill all instances of rclone.
2. run the mount command again and post the output.

---

<div class="post-metadata">

**Author:** ![stevecoh1](https://forum.rclone.org/user_avatar/forum.rclone.org/stevecoh1/32/15620_2.png) [@stevecoh1](https://forum.rclone.org/u/stevecoh1)\
**Post date:** [August 8, 2024, 5:48pm UTC](https://forum.rclone.org/t/beginner-question/47168/19 "2024-08-08T17:48:35Z")

</div>

```auto
{scohen@taormina ~}$ ps -ef | grep rclone
scohen 197393 83326 0 10:47 pts/2 00:00:00 grep --color=auto rclone

```

What next, reboot?

---

<div class="post-metadata">

**Author:** ![asdffdsa](https://forum.rclone.org/letter_avatar_proxy/v4/letter/a/848f3c/32.png) [@asdffdsa](https://forum.rclone.org/u/asdffdsa)\
**Post date:** [August 8, 2024, 5:51pm UTC](https://forum.rclone.org/t/beginner-question/47168/20 "2024-08-08T17:51:33Z")

</div>

we need a good debug log, running `rclone mount` on the command line.

> [@stevecoh1](#):
>
> What next, reboot?

could try something like `fusermount -uz /home/scohen/wopa/`

else reboot, but make sure to disable the systemd service beforehand.

[Next page](https://forum.rclone.org/t/beginner-question/47168.md?page=2)
